Adding and Maintaining Users
Changing Users
Overview
Renaming Users
Alternate
Methods
User Properties,
General
90
Q
1. If the user window is not shown, press CTRL-U or pick Users from the
U
View menu.
I
2. Double-click the user to change information. This takes you to the
C
General tab in the User Properties (you can also click the user once
K
and then pick Properties from the User menu).
3. Click the tab that has the information you want to change:
S
To change the user's name or ID: this is on the General tab.
T
To change the users access level, authority, limited access, or the
E
reader's sensitivity: Click the Security tab.
P
To change Custom entries: Click the Custom tab.
S
4. Change information as needed ant then click OK.
1. If the user window is not shown, press CTRL-U or pick Users from the View
menu.
2. Double-click the user to rename. This takes you to User Properties.
3. Type the new name, and then press ENTER or click OK.
Right-click the user's name and pick Rename from the menu that pops up; click
the user once and pick Rename from the View menu; or click the user once,
pause for long enough so the computer will not think you are double-clicking,
and then click directly on the user's name.
The General tab in User Properties lets you change the user's name or ID. It
also shows when the user last accessed a reader.
Name: Enter the user's name.
If you want to sort the list of users by last name: Enter the last name
first. For example, if the user's name is Sam Gamgee, you would enter
Gamgee, Sam.
Changing Users