Schlage PIB300 User Manual page 963

Configuration Tab
Set Up the Parity Bits
1. Add the Parity Bit to the Structure
a. Under Structure, choose Parity from the drop-down box.
b. Choose the first bit you want to use for the parity bit from the Start bit drop-down box.
c. Choose the number of sequential bits (usually 1) from the Length drop-down box.
d. Click the Add Field button.
2. Indicate whether that parity bit is even or odd
a. Under Parity 1, choose Even or Odd from the drop-down box.
b. Under Start Bit, choose the bit for which you want to identify parity from the drop-down box.
c. Click Add Field.
3. Identify which bits are considered to determine that parity bit
a. Under Parity 1, choose Included
b. Under Start Bit, choose the first bit that is used to determine this parity
c. Under Length, indicate the number of bits to consider
d. Click Add Field.
e. If the bits to consider are broken up (for example, if you want to consider bits 2–10 and bits 14–18), simply repeat this
step to add the additional bits.
34 • Schlage • HandNet Lite Terminal User's Guide