Schlage PIB300 User Manual page 1184

Monitoring Ongoing Activity
Buttons on the
Activity Details
Screen
102
Type: Each message falls into one of ten categories. When you are creating an
activity filter or custom activity report, you can limit your report or activity
view to specific types of messages; see Message Types on page 111 for
more detail.
Message: This shows the same message that you saw on the list in the Activity
window.
User/Info: If this message is associated with a particular user, this shows the
user's name and ID number.
Data: This shows technical detail about the message that is not relevant to your
use of the program. This is occasionally useful to support in debugging a
problem.
Acknowledged [checkbox]: This shows whether this message has been
acknowledged yet. You cannot uncheck this box once it is marked.
You also can check the box directly; you must use one of the three
Acknowledge... buttons below.
Acknowledge This Message: This marks the message as
acknowledged. After the message on the activity or alarm list,
you will see :ACK followed by the name of the operator who
acknowledged the message and the date/time when it was
acknowledged. If this is an alarm, this also shuts the alarm off.
Acknowledge & Show Next: This acknowledges the current message
and shows the next message. By next, we mean more recent
in time; that is, the message above the current message on the
activity list.
Acknowledge All Alarms: This button is disabled unless there is an alarm
that has not been acknowledged yet. You might use this button if you see
several related alarms on the list and you want to acknowledge them all
at once.
More Info: This brings up the online help.
Next: This shows the message that occurred more recently in time, that is, the
message directly before this on the activity list.
Previous: This shows the message that occurred before this message in time,
that is, the message directly after it on the activity list.
* * * * *