Schlage PIB300 User Manual page 1009

Programming the HandPunch
Service Menu
Password 1
Calibrate
Status Display
Autority Level
The HandPunch is programmed via a series of command menus. A summary of the
menus and commands is given in Table 3.
Table 3: Basic Command Mode Structure
Setup Menu
Password 2
Set Language List Users
Set Date Format Set User Data
Set Time and Date
Set Address
Set ID Length
Set Serial
Upgrade
To control access to the command menus, each menu has a unique password. This
password is requested as a part of the process for accessing each menu. A supervisor
must enter the correct password for that menu to access that menu. The default menu
passwords are given in Table 3.
To increase the security of the HandPunch, Schlage Biometrics recommends changing
the passwords for the command menus to new numbers. These password numbers can
be up to 10 digits long. This is done with the Set Passwords command described on.
A second method for controlling access to the command menus is through the use
of Authority Levels. Authority Levels control whether or not a user has access to the
command menus.
• Level 0 is for a user who does not need access to any of the command menus.
• Level 5 is assigned to Supervisors who need access to all of the command menus.
Management Menu
Password 3
Add Employee
Add Supervisor
Remove User
Enrollment Menu
Password 4
Special Enroll
Security Menu
Password 5