Schlage PIB300 User Manual page 971

Smart Card Tab
Table 11.5: Mifare Standard Definition Fields
Field Req'd?
Mifare definition Yes
name
Biometric template Yes
compression
Enter "new" FP Yes
Read Only Key A
Enter "new" FP Yes
Read Only Key B
Enter "new" MAD Yes
Read/Write Key B
Enter card issuer Yes
key AB
Enter "old" FP Read Yes
Only Key A
Enter "old" FP Read Yes
Only Key B
Enter "old" MAD Yes
Read/Write Key B
Change automatic Yes
key update
Table 11.6: Mifare Standard Sector Fields
Field Req'd?
Read card sectors
1K Card or 4K Card Yes
Two finger Yes
enrollment or One
finger enrollment
Use Mifare Yes
Application
Directory (MAD)
Automatic sector
assignments
Manual Sector
Assignment
42 • Schlage • HandNet Lite Terminal User's Guide
Description
• Name of the Mifare definition
• Any name that distinguishes this definition from others
• Controls the amount of compression of the finger template before it is written to the Mifare
card
• Maximum compression should be used initially
• See Table 11.7: Mifare Card Compression
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• Check the box to edit these fields
• Key entered must be the same in both boxes
• The automatic key update choices are:
• Diable auto key update
• Start unlimited auto key update
• Start limited auto key update (displays two additional fields)
• With limited auto key update, the operator can select the number of cards to be updated
and/or the number of cards to automatically update.
Description
• Select the desired FingerKey to use in reading an existing Mifare Standard card
• Select a card read timeout in seconds
• Click the Read card button and present the Mifare Standard card to the reader
• The card characteristics will be displayed
• Use either Automatic Sector Assignment or Manual Sector Assignment to determine where
the FingerKey will place the biometric template.
• Allows you to tell HandNet Lite if the Mifare Standard cards you will be using have 1K or 4K
capacity.
• If you have used the Read card button described above, this will be filled in automatically.
• Allows for storage of either one or two fingerprint biometric templates on the card.
• Allows for use of a MAD (Mifare Application Directory) on the card. A MAD is stored in sector
0 (and 16 if a 4K card) and tells devices how the sectors on the card are allocated.
• If unchecked, then you can assign any card sectors to fingerprint template storage.
• If Use Mifare Application Directory is checked, then clicking this button will instruct HandNet
Lite to automatically assign the sectors on the card to be used for biometric template
assignment (Schlage Biometrics Sector).
• Allows you to manually assign the sectors for either biometric template assignment (Schlage
Biometrics sector) or a free/available sector. You will need to assign sectors as Schlage
Biometrics sectors until the percentage assigned is 100%.
on page 43 for more information.