Schlage PIB300 User Manual page 1019

Hide thumbs Also See for PIB300:

Table of Contents

Programming the HandPunch

Enrollment Menu

Enrollment is the process of recording a hand image and associating it with an ID

number. The first person to enroll in the HandPunch has access to all command menus.

This person should enroll using the Add Supervisor command (see page 37). Once a

supervisor has been enrolled, all further enrollments use the following rules:

• A user enrolled through the Add Employee command (page 37) is assigned Authority

Level 0. This allows the user to punch in and/or gain access through a door secured by

the HandPunch.

• A user enrolled through the Add Supervisor command (see page 37) is assigned

Authority Level 5. This allows the supervisor to punch in and gain access through a

door secured by the HandPunch, and it allows the supervisor to access all command

Until a user has been assigned to Authority Level 5 using the Add Supervisor command,

every user with Authority Level 0 can access every menu. This is done to ensure that

the first person enrolled is able to access all the menus to perform all the programming

required to support the HandPunch. Once a user has been enrolled using the Add

Supervisor command, all further user authority levels are assigned as per the list above.

This protects the integrity of the system by enacting the Authority Level rules described

above. Schlage Biometrics strongly recommends enrolling at least two users as

supervisors to ensure that more than one person has the authority to access all menus

and all commands.

Advance planning and training make enrollment fast and easy. Users should be informed

on what to expect and how to place their hands on the HandPunch before you enroll

Enter the appropriate password to enter the Setup command menu. Once you have

entered the command menu, there are three options available for navigating the

command menu system.

to enter the command shown on the display.

to step to the next command in the menu.

to exit the command menu (pressing any numeric key also exits the

command menu). If you are in a command's sub-menu, press

completely exit the command menu.

multiple times to

Show Quick Links

Chapters

Table of Contents