Schlage PIB300 User Manual page 913

Note: Before creating any credential in the following steps, determine which credential
L
form is desired (see Credential forms on page 6).
NORMAL USE credentials
Note: Until a new Normal Use PIN is created, the default PIN is
To complete
this action:
Create a
Programming
Normal Use
PIN
PIN and
OR Present
Programming
Create a
Programming
Normal Use
CARD
PIN and
Programming
Create a
Programming
Normal Use
CARD +
PIN and
Card ID
Number
Programming
8 • Schlage • CO-200 user guide
Wait for
1
2
Enter Enter
card
Enter Enter
OR
Present
card
Enter Enter
OR
Present
card
Perform the following steps:
to stop flashing between each step!
3
Enter For another
new 3-6 PIN, go
digit PIN back to
and step 3
Enter Wait for
new 3-6 right green
digit
Card ID Present
Number new CARD
to lock.
and
Enter Enter new
3-6 digit
Card ID
Number
and
Wait for
right green
4 5
Press
again
to finish
For
another
light. CARD, go
back to
step 3
OR press
again
Present
new
CARD to
lock.
light.
6
Wait for
confirmation:
2 right green
blinks.
Wait for
confirmation:
2 right green
blinks.
For another
CARD+Card ID
credential, go
back to step 4
OR press
again to finish
Wait for
confirmation:
2 right green
blinks.