Schlage PIB300 User Manual page 822

Settings
Programming
You can specify the programming method and location for programming files in the Programming tab.
1. Click Settings > Program Settings.
2. Click Programming.
3. You can choose from four programming methods. Click the radio button next to the method you want to use.
• Program locks using a SNAP programmer -- Select this option if using one of the Legacy SNAP programmers.
• Program locks using this computer. -- Select this option if using this computer.
• Program locks using a Pocket PC. -- Select this option if using the Legacy Pocket PC or the New HHD (Hand Held
Device). The user will need to use the Change Folder option to select where program files will be saved (see instructions
below)
• Program locks using another Windows computer. -- Select this option if using another Windows PC. The user will need to
use the Change Folder option to select where program files will be saved (see instructions below)
4. If applicable, use the Change Folder option to select where program files will be saved (see instructions below).
5. Click Save.
If using the Program locks using a Pocket PC option:
1. Click Change Folder.
2. Navigate to the folder being used for synchronization by the Pocket PC.
3. Click OK.
4. Click Save.
If using the Program locks using another Windows computer option:
1. Click Change Folder.
2. Navigate to the folder being used for synchronization by the Pocket PC.
Click OK.
3.
4. Click Save.
Schlage • Schlage Express Software Manual • 35