Set Host Url - Schlage PIB300 User Manual

Set Host URL

The HostURL is used to authenticate with the host applica-
tion. This URL must match URL of the host application in
order for synchronization to occur.
1. Log into the terminal as an administrator.
See "Administrator Authentication" on page 47 for more information.
2. Press Setup Menu.
3. Press Network Setup.
4. Press Set HostURL.
5. Enter the host URL (complete URL, starting with "http://").
6. Press Enter.
Command Menu Reference
Default: http://127.0.0.1
Range: None
Dependencies: None
Who: A network administrator should
set HostURL during initial ter-
minal setup.
GT-Series Terminal User's Guide - 75