Table of Contents
Advertisement
Configuration Tab
Managing Readers
There are two parts to setting up readers: physically setting up the readers and connecting them to each other and to the computer,
and adding the network and readers in HandNet Lite. This manual only explains adding the network and readers in HandNet Lite.
For help setting up and wiring readers,
see the manual that came with the
readers.
Before you add readers, you must set up
the network to which they are connected.
See
Add a Network
on page
more information.
If You've Been Using Readers Already
If you've been using readers without
HandNet Lite, when you add the network
and readers to the system, HandNet Lite
automatically gets the users from the
readers and adds them to the system.
See
Enroll Users
on page
8
information.
Add a Reader
1.
Click the Configuration tab.
2.
Select the network in which the new
reader will exist from the network
drop-down box.
3.
Click the Create new reader button.
4.
Choose the Reader type from the
drop-down box. The entries on the
screen will differ depending on the
reader type chosen.
5.
Fill in the entries on the Reader
Edit screen. See
Figure 10.4:
FingerKey Reader Edit Screen
Figure 10.5: HandKey Reader Edit
Screen.
6.
Click the Test reader button. If the
reader is properly configured, the
reader will be able to communicate.
7.
To change the security settings for
the reader, click the Security settings
Figure 10.6: Security
button. See
Settings Screen
on page
more information.
8.
If you are editing a FingerKey and
want to edit the fingerprint settings,
click the Fingerprint settings button. See
9.
Click the Accept settings button.
24 • Schlage • HandNet Lite Terminal User's Guide
21
for
for more
Figure 10.4: FingerKey Reader Edit Screen
and
28
for
Figure 10.5: HandKey Reader Edit Screen
Figure 10.7: Fingerprint Settings Screen
on page
29
for more information.
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
