Schlage PIB300 User Manual page 691

Programming the FingerKey
Increasing
the Maximum
Number of
Users Readers
Can Accept
Enabling the
Reader to
Communicate
with a Host
Computer by
Ethernet
42
Memory Upgrade lets you increase reader
memory to handle more users. The reader initially
stores 50 users. You can purchase a code to
upgrade the reader so it can store additional users.
To upgrade, contact your dealer or systems
integrator.
If you upgrade the memory in one reader, we
recommend upgrading all readers in the network
at the same time. Otherwise, if you transfer users
from one reader to another, you could transfer more
users than another reader can hold. (If you do this,
the reader would just transfer as many users as it
could; you would not receive any indication that all
users weren't transferred).
Ethernet Upgrade lets you enable a reader to
communicate with a host computer through TCP/
IP. The reader is initially not configured to be able to
communicate through TCP/IP.
To upgrade, contact your dealer or systems
integrator.
MEMORY UPGRADE
*BACK #NEXT
To upgrade memory, press enter. You
see:
ENTER CODE
Enter your code on the keypad and
press ENTER.
If you don't press the correct code,
the display flashes Wrong Code and
returns you to the Memory Upgrade
prompt.
ETHERNET UPGRADE
*BACK #NEXT
To upgrade memory, press enter. You
see:
ENTER CODE
Enter your code on the keypad and
press ENTER.
If you don't press the correct code,
the display flashes Wrong Code and
returns you to the Ethernet Upgrade
prompt.