Schlage PIB300 User Manual page 954

Configuration Tab
Edit a Reader
1. Click the Configuration tab.
2. Select the network in which the reader you want to edit exists in the network drop-down box.
3. Click the Edit selected reader button.
4. The entries on the screen will differ depending on the reader type chosen.
5. Fill in the entries on the Reader Edit screen. See
10.5: HandKey Reader Edit Screen
6. Click the Test reader button. If the reader is properly configured, the reader will be able to communicate.
7. To change the security settings for the reader, click the Security settings button. See
on page 28 for more information.
8. If you are editing a FingerKey and want to edit the fingerprint settings, click the Fingerprint settings button. See
Fingerprint Settings Screen
9. Click the Accept settings button.
Delete a Reader
1. Click the Configuration tab.
2. Select the network in which the reader you want to delete exists in the network drop-down box.
3. Click the Edit reader button.
4. Click the Delete this reader check box.
5. Click the Accept settings button.
Figure 10.4: FingerKey Reader Edit Screen
on page 24.
29
on page for more information.
on page 24 and
Figure 10.6: Security Settings Screen
Schlage • HandNet Lite Terminal User's Guide • 25
Figure
Figure 10.7: