Schlage PIB300 User Manual page 845

SmarTime (SMT)
Delete a User Time Zone
Î NOTE: The 24Hr X 7 Days (Default) user time zone
cannot be deleted.
1. Click SmarTime (SMT).
2. Click to highlight the name of the user time zone you
want to delete.
3. Click Delete.
4. Click Yes.
Î The user time zone will still be active on the door until the door is reprogrammed.
Door AutoUnlocks
An AutoUnlock is a defined time period during which a lock is unlocked. At the end of the AutoUnlock time period, the lock will
automatically relock.
No audit events of legal access are logged during an AutoUnlock time period. Only the start and end of the AutoUnlock will be
logged.
AutoUnlocks are overridden by holidays. Up to eight (8) door AutoUnlocks can be added to a facility. Not all locks support
AutoUnlocks.
Secured Mode AutoUnlock
If an AutoUnlock has the same start and end time, the lock will be set to secure (locked) mode at that time. Using this technique,
you can make sure that a lock is locked from a specific time of day until it is unlocked by either a user, another AutoUnlock or a
holiday.
Add a Door AutoUnlock
1. Click SmarTime (SMT).
2. Click Door AutoUnlocks.
3. Click New.
4. Enter the name in the Name box.
• A name is required and must be between one (1) and thirty-two (32) characters long. The name cannot contain the tab
character or the pound (#) sign.
5. Set the Start Time and the End Time.
• The time boxes are divided into four parts: hour,
minute, second and day part. To enter the time,
click on the time part you want to change. Then either type the value or use the arrow buttons on the right of the time box
to increase or decrease the time.
6. Check the box below each day of the week for
which the user time zone will be in effect.
7. Click Save.
8. If you have entered the same time for the start and end times, a window will appear to confirm the creation of a secured mode
AutoUnlock. If you intended to create this kind of AutoUnlock, click OK. If you did not intend to create this kind of AutoUnlock,
click Cancel and go back to step 5.
58 • Schlage • Schlage Express Software Manual