Igmp Enable - 3Com 5500-EI PWR Reference Manual

Table 2-2 display igmp interface command output description
Vlan-interface1 (10.153.17.99):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in
seconds): 120
Value of maximum query response time for
IGMP(in seconds): 10
Value of robust count for IGMP: 2
Value of startup query interval for IGMP(in
seconds): 15
Value of last member query interval for IGMP(in
seconds): 1
Value of query timeout for IGMP version 1(in
seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.1.0.5 (this router)
IGMP group limit: 256
Total 1 IGMP group reported

igmp enable

Syntax
igmp enable
undo igmp enable
View
Interface view
Parameters
None
Field
2-3
Description
Interface name (IP address)
IGMP is currently enabled on the interface.
If IGMP is not enabled, no output information is
displayed.
IGMP version 2 (default) is running on the
current interface. Currently, two IGMP versions
are available: IGMPv1 and IGMPv2.
The IGMP query interval is 60 seconds (default).
The other querier present interval is 120 seconds
(default).
The maximum response time for IGMP general
queries is 10 seconds (default).
The IGMP robustness variable is 2 (default).
The IGMP startup query interval is 15 seconds
(default).
The IGMP last member query interval is 1 second
(default).
The query timeout time for IGMPv1 is 400
seconds (default).
IGMP multicast group filtering policy for
controlling the access to multicast groups.
"None" means no filtering policy is applied;
otherwise, the applied policy is displayed. For
example, "acl 2000, only for IGMP version 1"
means ACL 2000 is applied only on IGMPv1
reports.
The IGMP querier address is 10.1.0.5 (this
device).
The maximum number of IGMP multicast groups
that can be joined on the VLAN interface is 256.
Total number of IGMP multicast groups on the
interface is 1.