Huawei Quidway NetEngine80E Configuration Manual page 107

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterC-bgp-af-ipv6] peer 2001:db8:2::2 enable
[RouterC-bgp-af-ipv6] quit
[RouterC-bgp] quit
# Configure Router D.
[RouterD] bgp 100
[RouterD-bgp] router-id 2.2.2.2
[RouterD-bgp] peer 2001:db8:2::1 as-number 100
[RouterD-bgp] ipv6-family unicast
[RouterD-bgp-af-ipv6] peer 2001:db8:2::1 enable
[RouterD-bgp-af-ipv6] quit
[RouterD-bgp] quit
After the configuration is complete, run the display bgp ipv6 peer command to view statuses
of IPv6 IBGP peer relationships. The command output shows that the IBGP peer relationship
has been established between Router C and Router D. Use the display on Router D as an example.
[RouterD] display bgp ipv6 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer
PrefRcv
2001:db8:2::1
0
Step 4 Configure BGP4+ on Router C and import direct routes to BGP4+. Then view the routing tables
of Routers C and D.
# Configure Router C.
[RouterC] bgp 100
[RouterC-bgp] ipv6-family unicast
[RouterC-bgp-af-ipv6] import-route direct
[RouterC-bgp-af-ipv6] quit
[RouterC-bgp] quit
# Display the BGP4+ routing table of Router C.
[RouterC] display bgp ipv6 routing-table
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
Total Number of Routes: 12
*>
*>
*>
Issue 02 (2014-09-30)
V
4
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network : ::1
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
Network : 2001:db8:1::
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
Network : 2001:db8:1::1
NextHop : ::
MED : 0
Label :
Path/Ogn : ?
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Peers in established state : 1
AS MsgRcvd MsgSent
100 64 59
i - internal, s - suppressed, S - Stale
1 IP Routing Basic Configuration
OutQ Up/Down State
0 00:52:15 Established
PrefixLen : 128
LocPrf :
PrefVal : 0
PrefixLen : 64
LocPrf :
PrefVal : 0
PrefixLen : 128
LocPrf :
PrefVal : 0
82