Huawei Quidway NetEngine80E Configuration Manual page 100

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
[RouterC] vlan 10
[RouterC-vlan10] quit
[RouterC] interface GigabitEthernet 1/0/0
[RouterC-GigabitEthernet1/0/0] portswitch
[RouterC-GigabitEthernet1/0/0] undo shutdown
[RouterC-GigabitEthernet1/0/0] port link-type access
[RouterC-GigabitEthernet1/0/0] port default vlan 10
[RouterC-GigabitEthernet1/0/0] quit
[RouterC] interface Vlanif 10
[RouterC-Vlanif10] ip address 20.1.1.1 24
[RouterC-Vlanif10] quit
Step 3 Configure BGP between Router C and Router D.
# Configure Router C.
[RouterC] bgp 100
[RouterC-bgp] peer 20.2.1.2 as-number 100
[RouterC-bgp] quit
# Configure Router D.
[RouterD] bgp 100
[RouterD-bgp] peer 20.2.1.1 as-number 100
[RouterD-bgp] quit
Step 4 Configure BGP on Router C and import direct routes to BGP. Then view the routing tables of
Routers C and D.
# Configure Router C.
[RouterC] bgp 100
[RouterC-bgp] import-route direct
[RouterC-bgp] quit
# Display the BGP routing table of Router C.
[RouterC] display bgp routing-table
BGP Local router ID is 3.3.3.3
Status codes: * - valid, > - best, d - damped,
Total Number of Routes: 9
*>
*>
*>
*>
*>
*>
*>
*>
*>
# Display the BGP routing table of Router D.
[RouterD] display bgp routing-table
BGP Local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped,
Issue 02 (2014-09-30)
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop
20.1.1.0/24 0.0.0.0
20.1.1.1/32 0.0.0.0
20.1.1.2/32 0.0.0.0
20.1.1.3/32 0.0.0.0
20.1.1.4/32 0.0.0.0
20.2.1.0/24 0.0.0.0
20.2.1.1/32 0.0.0.0
127.0.0.0 0.0.0.0
127.0.0.1/32 0.0.0.0
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i - internal, s - suppressed, S - Stale
MED
0
0
0
0
0
0
0
0
0
i - internal, s - suppressed, S - Stale
1 IP Routing Basic Configuration
LocPrf PrefVal Path/Ogn
0 ?
0 ?
0 ?
0 ?
0 ?
0 ?
0 ?
0 ?
0 ?
75