Set Pwa Enhancedmode - Enterasys SecureStack B3 Configuration Manual

set pwa enhancedmode

Example
This example shows how to display PWA session information:
B3(su)->show pwa session
Port
-------- ----------------- --------------- ------------- ------------ ---------
ge.2.19
ge.2.19
ge.2.19
set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
20-68 Security Configuration
MAC IP
00-c0-4f-20-05-4b 172.50.15.121
00-c0-4f-24-51-70 172.50.15.120
00-00-f8-78-9c-a7 172.50.15.61
Enables or disables PWA enhancedmode.
User Duration
pwachap10 0,14:46:55
pwachap1 0,15:43:30
pwachap11 0,14:47:58
Status
active
active
active