Show Switch Stack-Ports - Enterasys SecureStack B3 Configuration Manual

show switch stack-ports

Parameters
switchindex
Defaults
None.
Mode
Switch command, read‐only.
Examples
This example shows how to display switch type information about all switches in the stack:
B3(su)->show switch switchtype
SID
--- -------------------------------- ---- ---------
1 B2G124-24
2 B2G124-48
3 B2G124-48P
4 B2H124-48
5 B2H124-48P
6 B3G124-24P
7 B3G124-48P
8 B3G124-48
9 B3G124-24
This example shows how to display switch type information about SID1:
B3(rw)->show switch switchtype 1
Switch Type....................... 0x56950200
Model Identifier.................. B2G124-24
Switch Description................ Enterasys Networks, Inc. B2 -- Model
Management Preference............. 1
Expected Code Version............. 0xa08245
Supported Cards:
Slot........................... 0
Card Index (CID)............... 1
Model Identifier............... B2G124-24
show switch stack-ports
Use this command to display various data flow and error counters on stack ports.
Syntax
show switch stack-ports [unit]
Parameters
unit
Defaults
None.
2-8 Configuring Switches in a Stack
(Optional) Specifies the switch index (SID) of the switch type to display.
Switch Model ID
(Optional) Specifies the switch unit ID, an integer ranging from 1 to 8.
Mgmt Code
Pref Version
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
1 0xa08245
B2G124-24