Creating And Naming Static Vlans - Enterasys Matrix 2G4072-52 Configuration Manual

VLAN Configuration Command Set

Creating and Naming Static VLANs

7.3.2 Creating and Naming Static VLANs
Purpose
To create a new static VLAN, or to enable or disable existing VLAN(s).
Commands
The commands used to create and name static VLANs are listed below and described in the
associated section as shown.
•
set vlan (Section
•
set vlan name (Section
•
clear vlan (Section
•
clear vlan name
7-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.2.1)
7.3.2.2)
7.3.2.3)
(Section 7.3.2.4)