Display Workflow; Setting Up Parameters For The First Time - Delta CP2000 Series Quick Start Manual

3-4 Display Workflow

3-5 Setting Up Parameters for the First Time

This section describes how to configure the drive correctly after turning it on for the first time.
To access the VFD parameters on the keypad display,
1. Push the MENU button on the keypad.
2. Scroll through the menu using
Parameter (Pr) Setup is a menu option that allows you to change the drive's setup
parameters. The parameters are organized as groups under Parameter Setup, from
System or Drive Parameters (00) to Industry Application Parameters (13).
3. Scroll through the list using
modify. Press ENTER to view the parameters in the selected group.
4. Use and
parameter's option menu.
5. To select a number that represents the option you want to set, use
and
and
to select the parameter you want to modify. Press ENTER to go to the
3-4 Display Workflow | CP2000
to select 1. Pr Setup and press ENTER.
to select the parameter group you want to
7
and .