Chapter 3 Unpacking - Delta CP2000 Series User Manual

The AC motor drive should be kept in the shipping carton or crate before installation. In order to
retain the warranty coverage, the AC motor drive should be stored properly when it is not to be
used for an extended period of time.
The AC motor drive is packed in the crate. Follows the following step for unpack:
Frame D
Crate 01 (VFDXXXCPXXX-00)
Loosen the 12 cover screws to open the crate.
Remove the EPEs and manual.
Loosen the 8 screws that fastened on the pallet,
remove the wooden plate.
03 Unpacking
Crate 02 (VFDXXXCPXXX-21)
Loosen all of the screws on the 4 iron plates at the
four bottom corners of the crate. 4 screws on each
of the iron plate (total 16 screws)
Remove the crate cover, EPEs, rubber and
manual.
3-1
Chapter 03 Unpacking