Step 6
Upload .juf file to U8903A Audio Analyzer (Figure 17 and 18)
Instructions
1.
Copy .juf file to a USB pen drive
2.
Plug the USB pen drive into the U8903A Audio Analyzer
Steps to upload to the U8903A Audio Analyzer
Press " ▼" key to access AA1 mode
3.
4.
Press "Meas. Config" softkey
5.
Press "Filter" softkey
6.
Press either "LPF", "HPF", or "weighting" softkey
7.
Select "Custom"
8.
Press "Source" softkey
9.
Press "Storage 1" softkey
10. Select the .juf file and press "Enter" key
11.
The Filter will now be shown on either the LPF, HPF, or Weighting tab depending on your selection
Figure 17. Uploading .juf file and selecting filter
13