Creating A New Session - Thermo Scientific Varioskan User Manual

Creating a new
Thermo Fisher Scientific
Note When a session has been executed, you can no longer edit
it. If you want to make any changes to the protocol or the plate
layout, save the session with a new name.
1. Select Session > New..., click New session in the main window, click
session
the
launched.
•
Select from the Protocol type list:
•
•
•
2. Give a name to the session in the Session name field. The Next button
becomes available.
button or press Ctrl+N. The Create New Session wizard is
Instrument type - The instrument you are using is shown in the
field.
Empty protocol - Start the protocol editing from a blank.
User-defined protocol - Use one of your own protocol templates
as the starting point (see Protocol template setup" on page 250).
Select the template from the list on the right.
K factor for pathlength correction - Use this protocol to define
the pathlength correction K-factor for the type of plate and solvent
you are using (see Editing pathlength correction K-factors" on
page 247. Also see Using pathlength correction in a measurement"
on page 97 and Pathlength correction" on page 72).
Thermo Scientific SkanIt

Creating a new session

® ®
Software for Varioskan User Manual
Sessions
61