Thermo Scientific Varioskan User Manual page 172

Data Processing Parameters
User-defined equation
170 Thermo Scientific SkanIt
• Step - Select the measurement raw data or data processing step that
contains the data you want to include. The list includes all the available
measurements and data processing steps.
• Wavelength - Select the wavelength to be used in the formula. If only
one wavelength has been used in the measurement, you must select that
wavelength.
• Group - Select the group name.
• Sample - Select the sample or replicate. If this selection is left empty,
all the samples from the selected step will be used.
• Column - Select the data type. This selection is step-dependent.
• Values - Add numbers and calculation types to the formula. For more
information about the available functions, see the section called
Functions in user-defined equation".
When adding a function, click first the appropriate function button,
then select the parameter(s) and close the parenthesis with the
® ®
Software for Varioskan User Manual
button.
Thermo Fisher Scientific