Advertisement
Data Processing Parameters
Basic statistics
Basic statistics
150
Thermo Scientific SkanIt
Select Data processing > Basic Statistics, click the
action panel, or right-click the measurement in the Results tree.
•
Multipoint statistics without dilution factors – Calculates the statistics
per well without combining data from different replicates or dilutions.
It can be used to calculate the statistics within each well in case of
multipoint measurements.
For example, a multipoint measurement with input data of eight
dilutions and two replicates for each dilution results in eight dilutions
with two replicates for a dilution. The average of the multipoint data is
calculated and the SD and CV% of the values are calculated.
•
Multipoint statistics with dilution factors – The same as Multipoint
statistics without dilution factors except that the values are multiplied
by dilutions before calculating the average
•
Replicate statistics without dilution factors – Calculates the statistics
per dilution without combining data from different dilutions. It
combines data from different replicates of the dilution. It can be used
to calculate the statistics within each dilution in case of dilution series.
For example, a multipoint measurement with input data of eight
dilutions and two replicates for each dilution results in eight dilutions
with one replicate for each dilution. The average of the multipoint and
replicate data is calculated and the SD and CV% of the replicate values
are calculated.
•
Replicate statistics with dilution factors – The same as Replicate
statistics without dilution factors except that the values are multiplied
by dilutions before calculating the average.
•
Sample statistics with dilution factors – Calculates the statistics per
sample while combining data from different dilutions and replicates
®
®
Software for Varioskan
User Manual
button on the Results
Thermo Fisher Scientific
Hide quick links:
Advertisement
