Calculation Results; Viewing Results In Table Format - Thermo Scientific Varioskan User Manual

Results

Calculation results

Calculation results
Viewing results in table
206 Thermo Scientific SkanIt
Click the calculation name in the Results tree on the left to view the
calculation results. The results can be viewed in both list and table formats
and with certain calculations as a graph. The view type is selected from the
tabs.
The information shown in the table and list views depends on the calculation
type. NaN = Not a number.
You can view and redefine the calculation parameters under the Parameters
tab after you have executed the run. For example, you can change the fit
type in Quantitative Curve Fit and Effective Dose calculations or change
the number of readings ignored in a kinetic reduction.
In the Results view, select the calculation from the Results tree and select
format
the Table tab. The calculations results are shown in plate layout format.
Use the Show options check boxes to select the information you want to
display for each well in addition to the sample name, dilution and calculation
result data. Other options are the group name, sample type,
dilution/concentration units and the replicate number. For kinetic
measurements and spectrum scanning, the calculated data is shown as curves.
Other viewing options are:
• Wavelength - If the measurement was performed with multiple
wavelengths, select here the wavelength for which the calculation data
® ®
Software for Varioskan User Manual Thermo Fisher Scientific