Thermo Scientific Varioskan User Manual page 161

Data Processing Parameters
Quantitative curve fit
The bolded results on the list are average values of all the replicates.
You can select whether to display the data on linear or logarithmic X- and
Y-axes by ticking the corresponding lin and log radio buttons.
You can change the scale of the Y-axis. Right-click within the graph and
select Properties . Select the Y axis tab and modify the Minimum and
Maximum values.
Note If you want to remove a calibrator point or a replicate, you
must disable it in the raw data. See the end of Raw measurement
data" on page 203.
® ®
Thermo Fisher Scientific Thermo Scientific SkanIt Software for Varioskan User Manual 159