Advertisement
Connecting the instrument
to the PC through a COM
Thermo Fisher Scientific
10. Click Close to exit the Instrument Settings dialog.
Note You can add several new instruments before clicking Close.
The new instruments are available immediately in the Instruments list
and in the list in the Execution action panel.
The PC and the Varioskan instrument are connected by using an RS-232
C serial cable.
port
1.
Close SkanIt Software and shut down the PC. Switch OFF the
Varioskan instrument from the mains switch on the left side panel of
the instrument.
2.
Connect the serial cable to a free serial (COM) port on your PC. This
port should correspond to the one defined for the instrument in the
database (defined in the Instrument Setup dialog, under the
Communications tab).
3.
Connect the other end of the cable to the SERIAL RS-232 C connector
(Figure 2-1) on the back panel of the instrument.
®
Thermo Scientific SkanIt
Software for Varioskan
Installing SkanIt Software
Communicating with instruments
®
User Manual
37
Hide quick links:
Advertisement
