Advertisement
Executing a Session
Emptying dispensers
Emptying dispensers
76
Thermo Scientific SkanIt
1.
Select a dispensing speed to test and find out the optimal dispensing
speed.
2.
Select the priming volume in increments of 100 µl. The volume range
is 100 to 9900 µl. The default is 1500 µl.
3.
Select the installed dispenser you want to prime.
4.
Click Prime. The instrument will prime the dispenser tubing.
5.
If you want to stop the priming, click Abort.
6.
When the priming is finished, click Close.
You can also prime the tubing using the Prime/Empty control switch located
on top of the dispenser (see the Thermo Scientific Varioskan User Manual).
You can empty the dispenser tubing to prevent wasting expensive reagents.
Select Execute > Empty... or click the
®
®
Software for Varioskan
User Manual
button.
Thermo Fisher Scientific
Hide quick links:
Advertisement
