Advertisement
Adding new samples to the plate
Thermo Fisher Scientific
The following parameters are found under the Properties tab:
Identification:
•
Name - The name of the selected sample.
•
Type - The type of the selected sample.
Properties:
•
Dilution/Concentration 1: - The dilution or concentration of the
current sample as a ratio of 1 to the value shown.
•
Dilution/Concentration unit - Enter the unit for dilution or
concentration values.
Tip On some keyboards, you can enter the character "µ" by
pressing AltGr+M.
•
Group - The group to which the selected sample belongs. You can set
multiple groups for one sample by separating the group names with
commas. You can also edit the group name. This lets you use, for
example, one control or calibrator series in several assay groups.
To add new samples to the plate layout:
layout
1.
Select the well or wells you want to fill in the Plate Layout panel. You
can paint several wells while keeping the right mouse key pressed down.
Use the Ctrl key to select several areas or to select wells one by one.
®
Thermo Scientific SkanIt
Software for Varioskan
Plate Layouts
Editing a plate layout
®
User Manual
135
Hide quick links:
Advertisement
