Thermo Scientific Varioskan User Manual page 237

Thermo Fisher Scientific
If the instrument is not connected, the software displays a message and
you have to first connect the software to the instrument. Exit the
instrument setup (click Cancel and then Close) and select Execute >
Connect. Start over again with Step 1.
The Dispensers list shows the dispensing position where a dispensing
head is located. It also shows the syringe and tip size as well as the
pull-back volume. The information is read from the instrument. If not
connected to the instrument, the last known configuration is read from
the database.
3. Edit the dispenser information by selecting the dispenser in the list
and clicking the Edit
the dispensing step. For more information on using dispensing in
protocols, see Dispense" on page 120.
• Dispenser - The Varioskan instrument and SkanIt Software have
one optional dispenser available; Dispenser 1.
Thermo Scientific SkanIt
button. The dispenser information is used in
®
Software for Varioskan
Settings
Instrument
®
User Manual 235