Spectral minimum
Thermo Fisher Scientific
•
Wavelength 1 - Select the starting wavelength for the spectral maximum
calculation.
•
Wavelength 2 - Select the end wavelength for the spectral maximum
calculation.
Note User-selectable wavelength values are not checked against
real measured values. Therefore, you may select wavelength values
that are not even measured.
•
Threshold - Enter the intensity threshold that the peak is required to
exceed. The minimum value is –10,000,000 units and the maximum
is 10,000,000.
The spectral minimum seeks the minimum measurement value in each well.
You can define a wavelength area for which this calculation is performed.
It is also possible to receive the minimum without defining the wavelength
area or the threshold.
•
Wavelength 1 - Select the starting wavelength for the scanning.
•
Wavelength 2 - Select the end wavelength for the scanning.
Note User-selectable wavelength values are not checked against
real measured values. Therefore, you may select wavelength values
that are not even measured.
Thermo Scientific SkanIt
Data Processing Parameters
®
®
Software for Varioskan
User Manual
Spectral analysis
177