Thermo Scientific Varioskan User Manual page 234

Settings
Instrument
232 Thermo Scientific SkanIt
• Connect - Opens a connection to the default instrument.
• Disconnect - Closes the connection to the default instrument. You
must close the connection before setting another instrument as the
default.
• Set Default - Click the button to set the selected instrument as the
default. The software will try to connect to the default instrument when
it is launched (see Launching SkanIt Software" on page 54).
• Setup... - You can edit the setup parameters of an existing instrument
and create instrument status reports.
• Duplicate - You can make a duplicate of an existing instrument and
save it with a new name.
• Delete - Remove the selected instrument from the database.
• Close - Close the dialog.
To edit instrument-related settings, select the instrument from the list and
click Setup.... The Instrument Setup dialog opens. General" on page 233
through Reports" on page 236 describes the Instrument Setup dialog. Also
see Options" on page 226.
To add a new instrument to the database, see Adding an instrument to the
PC database" on page 34.
® ®
Software for Varioskan User Manual Thermo Fisher Scientific