Adding A Concentration Or Dilution Series - Thermo Scientific Varioskan User Manual

Adding a concentration or
dilution series
Thermo Fisher Scientific
Example 8-1 Text file for defining names for unknown samples
Each line in the text file represents one sample. No spaces are allowed
and the sample names are separated by line breaks. The sample names
must not begin with a number. For example, A_100" is an acceptable
sample name, whereas 100_A" is not.
DemoSample_A_151204
DemoSample_B_151204
DemoSample_C_151204
• Add - Adds the sample information to the wells.
• Add and Close - Adds the sample information to the wells and closes
the Fill Wizard.
• Close - Closes the Fill Wizard without adding the sample information.
When you have entered all sample information to the plate, click Close to
return to the main window. If all the samples did not fit into one plate, the
software automatically adds new plates.
If you need several plates, click New in the Plates section and use Fill
Wizard again.
If you have to delete a sample from the plate layout, select the sample and
click Clear.
Note If all the samples and replicates do not fit in one plate,
additional plates are automatically added.
You can add a concentration series for calibrators and controls and a dilution
series for unknowns.
When you select Generate series in the Fill Wizard dialog and click
Concentrations or Dilutions, the Concentrations or Dilutions dialog is
launched.
Thermo Scientific SkanIt
® ®
Software for Varioskan User Manual
Plate Layouts
Editing a plate layout
131