Thermo Scientific Varioskan User Manual page 243

Thermo Fisher Scientific
Plate size:
• Height [mm] - The height of the plate.
• Length [mm] - The length of the plate (vertical).
• Width [mm] - The width of the plate (horizontal).
Security:
• Top safety zone [mm] - The top safety zone of the well in
multipoint measurements.
Well location:
• Corner distance X [mm] - The horizontal distance between the
centers of the corner wells.
• Corner distance Y [mm] - The vertical distance between the
centers of the corner wells.
• First well position X [mm] - The distance of the center of the
top-left well (A1) from the left edge of the plate.
• First well position Y [mm] - The distance of the center of the
top-left well (A1) from the top edge of the plate.
Well parameters:
• Well shape - The shape of the well is usually a circle or a square,
but may also be an ellipse or a rectangle, if the height and width
of the well are not equal.
• Well top diameter [mm] - The well top diameter.
• Well bottom diameter [mm] - The well bottom diameter.
• Well depth [mm] - The well depth.
• Well volume [µl] - The maximum filling volume of the well in
µl.
The Associated plate trays list displays the plate trays that are compatible
with the plate template. If you are adding a new plate template to the
database, you have to associate it with plate trays before it can be used.
The plate trays are associated with plate templates using the Plate Tray
Editor (see Associating plate templates with plate trays" on page 245).
Thermo Scientific SkanIt
® ®
Software for Varioskan User Manual
Settings
Plate template settings
241