Figure 10-9 Case Where An Hbw Calculation Is Not Possible - Thermo Scientific Varioskan User Manual

Data Processing Parameters
Spectral analysis
180 Thermo Scientific SkanIt
Figure 10-9. Case where an HBW calculation is not possible
In the case shown in Figure 10-9 there is no possibility to calculate HBW
values for any of the peaks. There are no lower wavelength values available
for any of the peaks.
• Wavelength 1 - Select the wavelength for the peak. Use spectral peak
search (see Spectral peak search" on page 174) or spectral maximum
(see Spectral maximum" on page 176) to identify the wavelength of the
peak.
Note User-selectable wavelength values are not checked against
real measured values. Therefore, you may select wavelength values
that are not even measured.
• Group - The calculation is performed for one replicate. Select the group
to be used in the calculation.
® ®
Software for Varioskan User Manual Thermo Fisher Scientific