Select Reading; Ignore Readings; Integral - Thermo Scientific Varioskan User Manual

Select reading

Ignore readings

Thermo Fisher Scientific
• Ignore first (n) readings - Ignores a defined number of points
(readings), counted from the first reading.
• Ignore last (n) readings - Ignores a defined number of points (readings),
counted from the last reading.
Select reading is used to select a specific kinetic measurement point (reading).
You can define the following settings:
• Reading (-1000...1000) - The number of the kinetic measurement
reading. You can select a reading that you want to use in further
calculations.
Ignore readings is used to dismiss a selected number of readings from the
beginning and/or the end of the measurement.
You can define the following settings:
• Ignore first (n) readings - Ignores a defined number of points
(readings), counted from the first reading.
• Ignore last (n) readings - Ignores a defined number of points (readings),
counted from the last reading.

Integral

The integral calculation estimates the area under the measurement curve
(Figure 10-14). The range of readings can be limited with the Ignore readings
selection.
®
Thermo Scientific SkanIt Software for Varioskan
Data Processing Parameters
Kinetic calculations
®
User Manual 193