Thermo Scientific Varioskan User Manual page 201

Thermo Fisher Scientific
• Graph title, X axis title and Y axis title - Enter titles for the graph and
the X- and Y-axes.
• X axis - Select which data you want to present on the X-axis: the samples,
the readings (in kinetic measurements), the measurement time, the
excitation wavelength or the emission wavelength.
• Well/sample label - You can display the names of the samples according
to the sample names or the well position. Not available for readings,
excitation or emission.
• Wells, Readings, Ex [nm] or Em [nm] - Select here which samples,
readings and excitation and emission wavelengths you want to display
on the graph by ticking the check boxes. Use the
all and the button to clear all selections.
The graph can be viewed when Graph is selected in the Results tree and
the Graph tab is selected on the main window area. An example of an
absorbance bar chart is shown below.
Thermo Scientific SkanIt
Data Processing Parameters
button to select
® ®
Software for Varioskan User Manual
Graph
199