Thermo Scientific Varioskan User Manual page 206

Results
Raw measurement data
204 Thermo Scientific SkanIt
• Wavelength - If the measurement was performed with multiple
wavelengths, select here the wavelength for which the raw measurement
data will be shown. You can use the drop-down list as well as the arrows
on both sides of the box to select the wavelength.
• Plate - Choose here the plate to be shown, if the plate layout contains
samples in more than one plate.
• Zoom - Select the zooming factor for optimal viewing of the wells.
For kinetic measurements and spectrum scanning, the measurement data
is shown as curves. You can also show the curve enlarged in a separate Curve
window. For more information, see Viewing results as curves" on page 211.
You can also view the results in the list view. Click the List tab. In the list
view, the results are shown row by row for each well.
The columns show the plate number, the well, the sample type, the group,
the sample name and the measurement time for each well. Measurement
times are counted from the first measurement of the first step which is zero.
All the other measurement times are relative to that time. Other information
in the list, shown in Table 11-1, depends on the measurement.
® ®
Software for Varioskan User Manual Thermo Fisher Scientific