Thermo Scientific Varioskan User Manual page 120

Step Parameters
Shake
118 Thermo Scientific SkanIt
Select Steps > Shake or click the
The shaking step includes the following parameters:
• Duration [hh:mm:ss] - Enter the total shaking time (step duration).
• ON time [hh:mm:ss.t] - If you want the shaking to be intermittent,
enter here how long each shaking period lasts. If you want to have a
constant shake, then the ON time equals the duration or total time of
the shake.
• OFF time [hh:mm:ss.t] - Enter how long the pause is between shaking
periods.
• Speed [spm] - Enter the shaking speed in shakes per minute (spm). The
available shaking speed range is 60 to 1,200 in 60 spm increments.
• Diameter [mm] - Enter the orbital shaking diameter. The available
shaking diameter is 1 to 50 mm in 1 mm steps.
• Shaking mode - Select whether the shaking sequence starts or ends with
a shaking ON time. If you select Background, the instrument shakes
during idle periods. With background shaking the shaking always ends
with an ON time. Duration is not available in the background mode.
® ®
Software for Varioskan User Manual
button on the action panel.
Thermo Fisher Scientific