Advertisement
Settings
Options
226
Thermo Scientific SkanIt
Options
Select Settings > Options.... The Options dialog is launched. The dialog
has five tabs: General, Database,Temperature, Number Formats and
Email settings.
General
The Settings > Options... > General tab is used for settings related to default
connection, plate position, checking the plate before execution and locking
the software.
•
Connect to default instrument at startup - When selected, the software
connects to the default instrument (see Instrument" on page 231) at
startup. Otherwise, the instrument is not connected. You can establish
the connection later by selecting Execution > Connect.
•
Leave plate in after run execution - When selected, the plate is left
inside the instrument after the run. Otherwise, the plate is always run
out of the instrument.
•
Run plate in when closing software - When selected, the plate is run
into the instrument when the software is closed.
•
Autolock software after no usage - Select the time after which the user
interface requires a new login, if SkanIt Software has not been used.
After the user has given the correct user name and password, the software
will be available in the state where it was last used.
•
Check plate - Tick to ensure that the instrument checks that a plate is
inserted in the instrument before executing the session.
®
®
Software for Varioskan
User Manual
Thermo Fisher Scientific
Hide quick links:
Advertisement
