Thermo Scientific Vanquish Charger Operating Manual
Hide thumbs
Also See for Vanquish Charger:
- Installation manual (47 pages) ,
- Operating manual (90 pages) ,
- Pre-installation (63 pages)
Related Manuals for Thermo Scientific Vanquish Charger
Summary of Contents for Thermo Scientific Vanquish Charger
- Page 1 thermoscientific Vanquish Charger Operating Manual 4829.0001‐EN Revision 1.0a • September 2017 ...
- Page 2 Copyright © 2014 Thermo Fisher Scientific Inc. All rights reserved. Trademarks Torx is a registered trademark of TEXTRON INDUSTRIES, INC. All other trademarks are property of Thermo Fisher Scientific Inc. and its subsidiaries. Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the product operation.
- Page 3 Thermo Fisher Scientific sales organization. For contact information, go to Contact Us on http://www.thermoscientific.com. Technical Assistance For technical support for HPLC products, contact your local Thermo Fisher Scientific support organization. For contact information, go to Contact Us on http://www.thermoscientific.com. Vanquish Charger Operating Manual Page 3...
- Page 4 Contacting Us Page 4 Vanquish Charger Operating Manual...
-
Page 5: Table Of Contents
3 Charger Overview ................25 Charger Features ....................26 Operating Principle ....................27 Interior Components..................... 28 3.3.1 LED Status Indicators ................29 3.3.2 Shelf ......................29 3.3.3 Mover ....................... 30 Device Connections ....................31 Operation ......................32 Vanquish Charger Operating Manual Page 5... - Page 6 Maintenance Plan ................... 58 7.3.2 Cleaning the Charger ................59 Updating the Charger Firmware ................60 Transporting or Shipping the Charger ..............62 8 Troubleshooting ................67 General Information about Troubleshooting ............68 Messages ......................70 Page 6 Vanquish Charger Operating Manual...
- Page 7 10 Accessories, Consumables and Replacement Parts ......77 10.1 General Information ..................... 78 10.2 Ordering Information .................... 79 11 Compliance Information ..............81 11.1 Declaration of Conformity ..................82 11.2 WEEE Compliance ....................83 11.3 FCC Compliance ....................84 12 Index .....................85 Vanquish Charger Operating Manual Page 7...
- Page 8 Contents Page 8 Vanquish Charger Operating Manual...
-
Page 9: Using This Manual
• Using this Manual 1 Using this Manual This chapter provides information about this manual, the conventions used throughout the manual, and the reference documentation that is available in addition to this manual. Vanquish Charger Operating Manual Page 9... -
Page 10: About This Manual
Illustrations in this manual are provided for basic understanding. They can vary from the actual model of the Charger or component. However, this does not influence the descriptions. No claims can be derived from the illustrations in this manual. Page 10 Vanquish Charger Operating Manual... -
Page 11: Conventions
NOTICE Highlights information necessary to prevent damage to the Charger or invalid test results. TIP Highlights information of general interest or helpful information that can make a task easier or optimize the performance of the Charger. Vanquish Charger Operating Manual Page 11... -
Page 12: Typographical Conventions
The electronic version (PDF) of the manual contains numerous links that you can click to go to other locations within the manual. These include: • Table of contents entries • Index entries • Cross-references (in blue text), for example, to sections and figures Page 12 Vanquish Charger Operating Manual... -
Page 13: Reference Documentation
For information about the main elements of the user interface and step-by-step guidance through the most important workflows, refer to the Quick Start Guide. For a concise overview of the most important workflows, refer to the Reference Card. Vanquish Charger Operating Manual Page 13... - Page 14 TIP The Chromeleon Help and documents are included in the software shipment. Third-Party Documentation Refer also to the user documentation provided by the manufacturers of third-party components and materials, for example, Material Safety Data Sheets (MSDSs). Page 14 Vanquish Charger Operating Manual...
-
Page 15: Safety
• Safety 2 Safety This chapter provides general and specific safety information and informs about the intended use of the Charger. Vanquish Charger Operating Manual Page 15... -
Page 16: Safety Symbols And Signal Words
Always keep the manual near the Charger for quick reference. • Save this manual and pass it on to any subsequent user. Read, understand, and comply with all safety messages and precautionary statements presented in this manual. Page 16 Vanquish Charger Operating Manual... -
Page 17: Safety Symbols On The Charger
The rating plate indicates the serial number, part number, line rating, and the manufacturer's address. An additional label on the left-hand side of the Charger near the electrical connections indicates the fuse and line rating. Vanquish Charger Operating Manual Page 17... -
Page 18: Intended Use
Regularly running calibration prior to reporting results • Establishing shelf life limits and following them for all consumables used with the system • Running the system according to the laboratory's verified and validated 'lab developed test' protocol Page 18 Vanquish Charger Operating Manual... -
Page 19: Safety Precautions
Thermo Fisher Scientific before proceeding. Safety Standard This device is a Safety Class I instrument (provided with terminal for protective grounding). The device has been manufactured and tested according to international safety standards. Vanquish Charger Operating Manual Page 19... -
Page 20: Qualification Of The Personnel
An eyewash facility and a sink should be available nearby. If any substance contacts your skin or eyes, wash the affected area and seek medical attention. Page 20 Vanquish Charger Operating Manual... -
Page 21: Electric Safety Precautions
Do not place liquid reservoirs directly upon the device. Liquid might leak into the device and get into contact with electronic components causing a short circuit. Instead, place liquid reservoirs in the solvent rack that is available for the Vanquish system. Vanquish Charger Operating Manual Page 21... -
Page 22: General Residual Hazards
Wear personal protective equipment as required by the hazard and follow good laboratory practice. • Dispose of bio-hazardous waste in an environmentally safe manner that is consistent with local regulations. Follow a regulated, approved waste disposal program. Page 22 Vanquish Charger Operating Manual... -
Page 23: In Case Of Emergency
2.3.6 In Case of Emergency WARNING—Safety Hazard In case of emergency, disconnect the Charger from the power line. Vanquish Charger Operating Manual Page 23... -
Page 24: Compliance Information
Thermo Fisher Scientific or one of its authorized representatives. The device has been shipped from the manufacturing site in a safe condition. Page 24 Vanquish Charger Operating Manual... -
Page 25: Charger Overview
• Charger Overview 3 Charger Overview This chapter introduces you to the Charger and the main components. Vanquish Charger Operating Manual Page 25... -
Page 26: Charger Features
To prevent the samples from being humidified, a condensate collector tray traps the condensate and the moisture evaporates from the tray. • The Charger is designed to be controlled by the Chromeleon Chromatography Data Management System. Page 26 Vanquish Charger Operating Manual... -
Page 27: Operating Principle
Shelf with sample racks and/or well plates (here: deep well plates) Deep well plate being transported Mover Autosampler carousel – the yellow segment (Y) is used for sample racks and well plates delivered from the Charger Vanquish Charger Operating Manual Page 27... -
Page 28: Interior Components
Interior Components The functional components of the Charger are located directly behind the front door: Figure 2: Interior view (door not shown) Description LED status indicators Transfer opening to autosampler Shelf Mover Shelf locking rail Page 28 Vanquish Charger Operating Manual... -
Page 29: Led Status Indicators
For a list of available shelves, refer to section 10 Accessories, Consumables and Replacement Parts, page Description Top handle Guide rail Level number Bottom handle Shelf ID label Recess for shelf locking rail Figure 3: Shelf Vanquish Charger Operating Manual Page 29... -
Page 30: Mover
The mover is equipped with a barcode reader to identify sample racks and well plates in the shelf as well as empty positions. Figure 4: Mover Description Barcode reader Swivel arm Shovel ID label Shovel Page 30 Vanquish Charger Operating Manual... -
Page 31: Device Connections
Chromeleon, is installed. TIP Thermo Fisher Scientific recommends using the USB ports only as described above. If the USB ports are used for any other purpose, Thermo Fisher Scientific cannot ensure proper functionality. Vanquish Charger Operating Manual Page 31... -
Page 32: Operation
For details, contact the Thermo Fisher Scientific sales organization. To control the Charger, a Vanquish autosampler must be installed and configured in Chromeleon. All functions for controlling the Charger are part of the autosampler control interface. Page 32 Vanquish Charger Operating Manual... -
Page 33: Unpacking And Transport
• Unpacking and Transport 4 Unpacking and Transport This chapter provides information for unpacking and moving the Charger and informs you about the scope of delivery. Vanquish Charger Operating Manual Page 33... -
Page 34: Unpacking And Moving
4. Remove the polyethylene packaging. 5. Slowly and carefully, lift the Charger out of the shipping container. Never lift the Charger only by the foam spacers or the front door. 6. Place the Charger on a stable surface. Page 34 Vanquish Charger Operating Manual... - Page 35 If you have to move the Charger after it has been set up and installed in the Vanquish system, prepare the Charger for transport and move it to the new location. Follow the instructions in section 7.5 Transporting or Shipping the Charger, page Vanquish Charger Operating Manual Page 35...
-
Page 36: Scope Of Delivery
Installation Kit including adapter frame for attaching the Charger to the Vanquish autosampler • USB cable (with ferrite bead) • Power cord • Printed operating manual • Printed installation manual For reordering information, see section 10 Accessories, Consumables and Replacement Parts, page Page 36 Vanquish Charger Operating Manual... -
Page 37: Installation
• Installation 5 Installation This chapter specifies the requirements for the installation site. Vanquish Charger Operating Manual Page 37... -
Page 38: Safety Guidelines For Installation
• To lift or move the Charger, grasp the Charger by the sides. Do not move or lift the Charger by the front door. This will damage the door or the Charger. Page 38 Vanquish Charger Operating Manual... -
Page 39: Site Requirements
Therefore, always unplug the power cord before starting repair work inside the device. If you were instructed to remove any covers or panels, do not connect the power cord to the device while the cover or panels are removed. Vanquish Charger Operating Manual Page 39... - Page 40 If you suspect that condensation is present, allow the device to warm up to room temperature. This may take several hours. Wait until the condensation is gone completely before connecting the Charger to the power line. Page 40 Vanquish Charger Operating Manual...
-
Page 41: Operation
• Operation 6 Operation This chapter describes the elements for Charger control, provides information on routine operation and on shutdown. Vanquish Charger Operating Manual Page 41... -
Page 42: Introduction To This Chapter
For a basic description of instrument control and automated sample analysis with Chromeleon, refer to the Vanquish System Operating Manual. Details on control and operation of the Charger are available in the Chromeleon Help. Page 42 Vanquish Charger Operating Manual... -
Page 43: Safety Guidelines For Operation
Charger back into use. To prevent spills, follow these guidelines: • Ensure that well plates and sample racks are properly positioned inside the shelf. • Ensure that the shelf is properly mounted on the shelf locking rail. Vanquish Charger Operating Manual Page 43... - Page 44 Charger are moving. During these phases, the Mover Status LED on the Charger is blinking green. • Do not place liquid reservoirs or any other items on top of the Charger. Page 44 Vanquish Charger Operating Manual...
-
Page 45: Control Elements
Green blinking: the Charger is connected to the software and equilibrating (target temperature has not been reached) Green: the Charger is connected to the software, and the target temperature has been reached. Vanquish Charger Operating Manual Page 45... -
Page 46: Power Switch
Charger cannot be turned on or off with the power button on the Vanquish system base. TIP The Charger door is equipped with a mechanism that opens the door automatically when the Charger is turned off. The door cannot be closed while power is off. Page 46 Vanquish Charger Operating Manual... -
Page 47: Preparing The Charger For Operation
Keep the door closed until the target temperature has been reached. Note that in case of excessive ambient conditions (while cooling and at set temperatures below ambient), condensation might appear temporarily on the outside of the Charger door. Vanquish Charger Operating Manual Page 47... -
Page 48: Loading Sample Racks Or Well Plates
To open the front door, slightly pull on the door. If you must move the mover manually after you have opened the door, gently push the mover into a safe position. Do not use any great force when moving the mover by hand. Page 48 Vanquish Charger Operating Manual... - Page 49 2. Verify that the shelf has properly clicked into place on the shelf locking rail. Figure 6: Placing the shelf The Charger will automatically detect the shelf type after the door has been closed, and Chromeleon displays the number of available levels. Vanquish Charger Operating Manual Page 49...
- Page 50 Refer to the current list of sample racks and well plates approved by Thermo Fisher Scientific. • When you place sample racks and well plates without such barcodes, double-check the correct positioning as described in this section. Page 50 Vanquish Charger Operating Manual...
- Page 51 TIP Check the Chromeleon 7 ePanel or Chromeleon 6.80 panel for the Charger for sample rack and well plate information. This may be helpful, for example, to find out which shelf levels are free to place a new sample rack or well plate. Vanquish Charger Operating Manual Page 51...
-
Page 52: Selecting The Rack Type
You do not have to select a rack type. However, you must select a rack type for sample racks and well plates without such a barcode. For details how to select the rack type, refer to the Chromeleon Help. Page 52 Vanquish Charger Operating Manual... -
Page 53: Important Settings For Operation
Reset Resets the internal Charger and autosampler control information. This may be required, for example, if a rack had to be removed manually from segment Y. Vanquish Charger Operating Manual Page 53... -
Page 54: Shutting Down The Charger
To restart the Charger, follow these steps: 1. Reconnect the power cord if necessary and turn on the Charger. 2. Prepare the Charger for operation (see section 6.4 Preparing the Charger for Operation, page 47). Page 54 Vanquish Charger Operating Manual... -
Page 55: Maintenance
• Maintenance 7 Maintenance This chapter describes the routine maintenance procedures that the user may perform. Vanquish Charger Operating Manual Page 55... -
Page 56: Introduction To Maintenance
This chapter describes the routine maintenance procedures that the user may perform. Additional maintenance or service procedures must be performed only by service personnel certified by Thermo Fisher Scientific (for brevity, referred to as Thermo Fisher Scientific service personnel). Page 56 Vanquish Charger Operating Manual... -
Page 57: Safety Guidelines For Maintenance
2.3 Safety Precautions, page WARNING—High Voltage High voltages are present inside the Charger that could cause an electric shock. Do not open the housing or remove protective panels unless specifically instructed to do so in this manual. Vanquish Charger Operating Manual Page 57... -
Page 58: Routine And Preventive Maintenance
Check that the ID labels on the shovel and shelves are still present and clearly legible. If they are not, contact Thermo Fisher Scientific for replacement. Annually Have Thermo Fisher Scientific service personnel perform preventive maintenance once a year. Page 58 Vanquish Charger Operating Manual... -
Page 59: Cleaning The Charger
Do not use excessively wetted cloth or paper for cleaning. Prevent any liquids from entering the functional components of the Charger. Liquids might cause a short circuit when getting in contact with the electronic components. Vanquish Charger Operating Manual Page 59... -
Page 60: Updating The Charger Firmware
1. Start the Chromeleon 7 Instrument Configuration Manager or the Chromeleon 6.8 Server Configuration program. 2. Perform a firmware update from the General tab page in the configuration dialog box for the Charger. For details, refer to the Chromeleon Help. Page 60 Vanquish Charger Operating Manual... - Page 61 • If the firmware update failed, turn the device off and on again and repeat the firmware update. • If the firmware update fails repeatedly, contact Thermo Fisher Scientific Technical Support for assistance. Vanquish Charger Operating Manual Page 61...
-
Page 62: Transporting Or Shipping The Charger
1. Shut down the Charger as described in section 6.6, page 54. In particular, verify that the shelf and any samples were removed from the Charger compartment before you continue. 2. Disconnect the power cord. Page 62 Vanquish Charger Operating Manual... - Page 63 Place foam part 1 (see Figure 10) below the mover arm and lower the mover arm to the lowest position, such that the shovel and mover arm rest in the cavities of the foam part. Vanquish Charger Operating Manual Page 63...
- Page 64 6. Remove the Charger from the Vanquish system. NOTICE Always fix the shipping lock screws before moving or shipping the Charger. Transporting the Charger without fixing the shipping lock screws will damage the device. Page 64 Vanquish Charger Operating Manual...
- Page 65 Service Return Form. Sign the certificate to confirm that the device has been properly decontaminated and that it is free of hazardous substances. • Thermo Fisher Scientific refuses to accept devices for repair if the Decontamination Certificate is missing. Vanquish Charger Operating Manual Page 65...
- Page 66 • Maintenance Page 66 Vanquish Charger Operating Manual...
-
Page 67: Troubleshooting
• Troubleshooting 8 Troubleshooting This chapter is a guide to troubleshooting issues that may arise during operation of the Charger. Vanquish Charger Operating Manual Page 67... -
Page 68: General Information About Troubleshooting
The Connect/Equil LED on the front side is unlit when the Charger is not connected. If the LED is unlit during operation, this may indicate a problem with the connection to the computer. In this case, check the USB cable and connection to the computer. Page 68 Vanquish Charger Operating Manual... - Page 69 Abort • The queue (Chromeleon 7) or batch (Chromeleon 6.8) cannot be started. • A running queue or batch is stopped immediately. For possible causes and recommended remedial actions, see section 8.2 Messages, page Vanquish Charger Operating Manual Page 69...
-
Page 70: Messages
An error occurred while trying to load a rack from the sampler's carousel. or An error occurred while trying to place a rack in a shelf position. or An error occurred while trying to move a rack onto the sampler's carousel. Page 70 Vanquish Charger Operating Manual... - Page 71 Inventory scan has failed. Please check if Open the Charger door and check the racks. Close the Charger door the racks are placed properly. and wait for the inventory scan to finish. Vanquish Charger Operating Manual Page 71...
- Page 72 The Charger has encountered an unexpected error. Note code number and turn the device off, wait for 5 seconds and turn it on again. If the error persists, contact Thermo Fisher Scientific Technical Support. Page 72 Vanquish Charger Operating Manual...
-
Page 73: Specifications
• Specifications 9 Specifications This chapter provides the physical and performance specifications of the Charger. Vanquish Charger Operating Manual Page 73... -
Page 74: Performance Specifications
Automatic stop when door is opened (interlock door switch) Automatic opening of door after power failure 3 LEDs for status monitoring Good Laboratory Practice (GLP) All system parameters are logged in the Chromeleon Audit Trail. features Page 74 Vanquish Charger Operating Manual... -
Page 75: Physical Specifications
~ 350 W Overvoltage category Emission sound pressure level ≤ 60 dB(A) in 1 m distance Dimensions 750 mm x 339 mm x 620 mm (height x width x depth) Weight Approx. 35 kg Vanquish Charger Operating Manual Page 75... - Page 76 • Specifications Page 76 Vanquish Charger Operating Manual...
-
Page 77: Accessories, Consumables And Replacement Parts
• Accessories, Consumables and Replacement Parts 10 Accessories, Consumables and Replacement Parts This chapter provides information for reordering accessories, consumables, and replacement parts. Vanquish Charger Operating Manual Page 77... -
Page 78: General Information
Accessories, consumables, and replacement parts are always maintained at the latest technical standard. Therefore, part numbers are subject to change. If not otherwise stated, updated parts will be compatible with the parts they replace. Page 78 Vanquish Charger Operating Manual... -
Page 79: Ordering Information
Power cord, India, SA 6000.1090 Power cord, Italy 6000.1040 Power cord, Japan 6000.1050 Power cord, UK 6000.1020 Power cord, USA 6000.1001 Power cord, Switzerland 6000.1030 Other Parts Description Part No. USB cable (with ferrite bead) 6900.1021 Vanquish Charger Operating Manual Page 79... - Page 80 • Accessories, Consumables and Replacement Parts Page 80 Vanquish Charger Operating Manual...
-
Page 81: Compliance Information
• Compliance Information 11 Compliance Information This chapter provides additional compliance information. Vanquish Charger Operating Manual Page 81... -
Page 82: Declaration Of Conformity
• Compliance Information 11.1 Declaration of Conformity CE Declaration of Conformity The device has satisfied the requirements for the CE mark and is compliant with the applicable requirements. Page 82 Vanquish Charger Operating Manual... -
Page 83: Weee Compliance
Thermo Fisher Scientific has contracted with one or more recycling or disposal companies in each European Union (EU) Member State, and these companies should dispose of or recycle this product. For further information, contact Thermo Fisher Scientific. Vanquish Charger Operating Manual Page 83... -
Page 84: Fcc Compliance
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his expense. Page 84 Vanquish Charger Operating Manual... -
Page 85: Index
• Index 12 Index Vanquish Charger Operating Manual Page 85... - Page 86 ............... 48 rack type ............52, 53 restart ..............54 safety guidelines ..........43 sample rack orientation ........50 gloves ..............21 shelf ..............49 temperature control .......... 47 well plate orientation ......... 50 Page 86 Vanquish Charger Operating Manual...
- Page 87 ........... 16, 17 barcode ............... 50 sample position ............53 orientation ............50 sample rack ............. 48 rack type ............52, 53 barcode .............. 50 orientation............50 rack type ............52, 53 Vanquish Charger Operating Manual Page 87...
- Page 88 www.thermofisher.com Thermo Fisher Scientific Inc. 168 Third Avenue Waltham Massachusetts 02451...
Need help?
Do you have a question about the Vanquish Charger and is the answer not in the manual?
Questions and answers