Deleting A Session Or A Run From The Database - Thermo Scientific Varioskan User Manual

Sessions

Deleting a session or a run from the database

Deleting a session or
a run from the
database
64 Thermo Scientific SkanIt
To delete a session or a run from the database on the PC:
1.
Select Session > Open... or click the
2. In the Open Existing Session/Run dialog, select the desired session
or run in the tree view. If you select a session, and the protocol and
plate layout are not used in any other session, they will also be deleted.
3. Click Delete, or right-click on the session or run and select Remove.
If the run or session is currently open, you cannot delete it unless you
first close it. Close the item and select it again for deletion.
Note If you delete a session, all of its runs are also deleted.
® ®
Software for Varioskan User Manual
button.
Thermo Fisher Scientific