Editing Pathlength Correction K-Factors - Thermo Scientific Varioskan User Manual

Editing pathlength
correction K-factors
Thermo Fisher Scientific
5. Click OK.
The Edit Pathlength Correction K-Factors dialog can be used for checking
the pathlength correction factors already in the database and for adding
known values (from literature) to the database. For more information on
pathlength correction and how to define new pathlength correction factors,
see Pathlength correction" on page 72 and Measuring new pathlength
correction K-factors" on page 73. For information on using pathlength
correction factors in measurements, see Using pathlength correction in a
measurement" on page 97.
Note The pathlength correction is dependent on the material used
to manufacture the plate, and should be redetermined if the plate
type is changed.
Select Settings > Pathlength Correction.... The Edit Pathlength Correction
K-Factors dialog is launched.
• Plate templates - Select the plate template for which you want to check
the pathlength correction factor or add a new factor.
Note The pathlength correction factor can only be used with 96-
and 384-well plates.
• Solvent list - List of solvents and their pathlength correction factors
with descriptions.
• Duplicate... - Make a copy of an existing pathlength correction factor
and save it with a new name.
Thermo Scientific SkanIt

Editing pathlength correction K-factors

® ®
Software for Varioskan User Manual
Settings
247