Plate Layout Editing Window; Figure 3-2 Main Window For Protocol Editing - Thermo Scientific Varioskan User Manual

Plate layout editing
Thermo Fisher Scientific
Figure 3-2. Main window for protocol editing
• 1 - Menu bar
• 2 - Action panels
• 3 - Session list
• 4 - Tree view of protocol steps. Use the
up or down in the protocol, the
button to remove steps.
• 5 - Main panel showing the parameters of the protocol itself or the
selected protocol step
For more information on editing a protocol, see Editing a protocol" on
page 81 and Chapter 7: Step Parameters".
The following figure shows an example of a plate layout that has been opened
window
in the main window. The plate layout is selected from the session list. The
plate layout can now be viewed or edited in the main panel. When a well
is selected, its properties can be viewed or edited in the Sample Properties
panel.
button to rename steps, and the
®
Thermo Scientific SkanIt Software for Varioskan
User Interface
Navigating in the software
and buttons to move steps
®
User Manual 43