Advertisement
Data Processing
Thermo Fisher Scientific
•
Cut - Cuts the selected protocol step in the protocol step list or the
selected item in the plate layout to the clipboard.
•
Copy - Copies the selected protocol step in the protocol step list or the
selected item in the plate layout to the clipboard.
•
Paste - Pastes the protocol step or item from the clipboard to the
protocol step list or the plate layout. The step or item will automatically
be renamed.
•
Rename - Allows you to rename the selected protocol step or calculation
step.
•
Delete - Deletes the selected protocol step from the protocol step list
or the selected item from the plate layout.
Steps
•
<Step type> - Adds the chosen step type to the current protocol after
the selected step. If no step is selected, the new step is added after the
last step. For more information, see Adding new protocol steps" on
page 83 and Chapter 7: Step Parameters".
•
<Calculation type> - Adds the chosen calculation to the selected
measurement results. For more information, see Chapter 10: Data
Processing Parameters".
•
Report / Export -You can create a custom-made report (see
Measurement and calculation reports" on page 213).
•
Save -You can automatically save and print the measurement or
calculation results directly after a measurement (see Saving measurement
and calculation data" on page 211).
•
Quick Export - You can manually export the measurement and
calculation data (see Saving manually" on page 213).
Settings
•
Options... - Launches the Options dialog. You can set general default
parameters, such as the startup temperature, and others (see Options"
on page 226).
•
Instrument... - Launches the Instrument Setup dialog. You can
configure the instrument connected to SkanIt Software and set the
®
Thermo Scientific SkanIt
Software for Varioskan
Menus and Action Panels
Menu commands
®
User Manual
261
Hide quick links:
Advertisement
