Thermo Scientific Varioskan User Manual page 32

Installing SkanIt Software
Installing
30 Thermo Scientific SkanIt
•
•
•
•
•
•
Click Configure.
The installation proceeds with the database configuration.
8. When the installation is complete, you will receive a notification of it.
Click Close.
® ®
Software for Varioskan User Manual
Create a new database - SkanIt Software will be connected to an
existing database engine (the one installed in the prerequisites) and
a new SkanIt Software database will be created. This is
recommended for new installations.
Use an existing database - SkanIt Software will be connected to
an existing database engine and an existing SkanIt Software
database will be used. If the database you select is not compatible
with the current software version, you can upgrade the database
(see Upgrade" on page 290).
Server Name - The setup will automatically detect the computer's
name. This is the name of the database engine (Server) where the
SkanIt Software database will be created. The database engine has
the instance name THERMO, separated by a backslash (\).
DB Name - The name of the SkanIt Software database which you
want to create. The default name is SkanIt_RE or SkanIt_DDE.
If a database with the defined name already exists, you will obtain
an error message. The existing database will not be overwritten.
Username - The administrator login (system administrator) for
the database engine (sa or equivalent). sa" is default, as defined
in Installing software prerequisites" on page 23, Step 1. If you
are using a previously installed database engine, it is possible that
the username is not sa". Make sure that you use the correct
username defined for the database engine.
Password - The login password defined for the system
administrator (as was entered in Step 1). If you are using a
previously installed database engine, make sure that you use the
correct password.
Thermo Fisher Scientific