Modifying Group Names; Changing Sample Types - Thermo Scientific Varioskan User Manual

Plate Layouts
Editing a plate layout

Modifying group names

Changing sample types

138 Thermo Scientific SkanIt
3. Enter the name of the new group in the Group field and press the
Enter key. Separate the groups with commas. The name can only
contain the following characters: a – z, 0 – 9, and an underscore.
To modify the group name of the sample:
1. Select the well(s) with the sample in the Plate Layout panel. You only
have to select one of the wells because all the replicates are given the
same information.
2. Select the Properties tab in the Sample Properties panel.
3. Click on Group field and modify the group name. Press the Enter
key.
To change the type of the sample:
1. Select the well(s) with the sample in the Plate Layout panel. You only
have to select one of the wells because all the replicates are given the
same information.
2. Select the Properties tab in the Sample Properties panel.
® ®
Software for Varioskan User Manual Thermo Fisher Scientific