Adding New Plate Trays To The Database - Thermo Scientific Varioskan User Manual

Settings
Plate tray
Adding new plate trays to
the database
244 Thermo Scientific SkanIt
• Remove - Remove the selected plate tray from the database.
Associated plate templates:
• Add... - Add an associating link between a plate template and a
compatible plate tray. The plate can thus be used when the plate tray
is in the instrument (see Associating plate templates with plate trays"
on page 245).
• Remove - Remove the link between the selected plate template and the
selected plate tray.
You can add a new plate tray to the database.
1. Select Settings > Plate Tray.... The Plate Tray Editor dialog opens.
2. Click New.... The Add New Plate Tray dialog opens.
3. Define the following settings:
•
•
•
•
•
® ®
Software for Varioskan User Manual
Name - Enter the name of the plate tray. The name must be unique
and it should be descriptive.
Number - Enter the plate tray identification number. You can
only use numbers that are not already in use (the OK button is
otherwise not available).
Tray z height [mm] - Enter the tray z height provided with the
adapter.
Type - Select the type of plate tray: Universal tray, Robotic tray
or Specific incubation tray.
Lid - Tick the check box if the plate tray can be used with plates
with a lid.
Thermo Fisher Scientific