Associating plate templates
with plate trays
Thermo Fisher Scientific
•
Incubation enabled - Tick the check box if the plate tray can be
used with incubation.
•
Description - Enter an optional description of the plate tray.
4.
Click OK.
You must associate a plate template with one or several plate trays before
you can use the plate template. An associating link between a plate template
and a plate tray is created.
1.
Select Settings > Plate Tray.... The Plate Tray Editor dialog opens.
2.
Select the plate tray from the list and click Add.... The Select Plate
Template dialog opens.
3.
Select the plate template from the list and click OK.
Thermo Scientific SkanIt
®
®
Software for Varioskan
User Manual
Settings
Plate tray
245